Aurora Multimedia Aspyre ASP-44 User Manual Download Page 24

~ 23 ~ 

 

 
Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both 
materials and workmanship for a period of 3 years as defined herein for parts and labor from 
date of purchase.  Motorized mechanical parts (Hard Drives, DVD, etc), mechanical parts 
(buttons, doors, etc), remotes and cables are covered for a period of 1 year.   Batteries are not 
covered by this warranty.   During the warranty period, and upon proof of purchase, the product 
will be repaired or replaced (with same or similar model) at our option without charge for parts 
or labor for the specified product warranty period. 

This warranty shall not apply if any of the following: 

A) The product has been damaged by negligence, accident, lightning, water, act-of-God or 

mishandling; or, 

B) The product has not been operated in accordance with procedures specified in operating 

instructions: or, 

C) The product has been repaired and or altered by other than manufacturer or authorized 

service center; or, 

D) The product's original serial number has been modified or removed: or, 

E)  External equipment other than supplied by manufacturer, in determination of manufacturer, 

shall have affected the performance, safety or reliability of the product. 

F)  Part(s) are no longer available for product.          

In the event that the product needs repair or replacement during the specified warranty period, 
product should be shipped back to Manufacturer at Purchaser's expense.   Repaired or replaced 
product shall be returned to Purchaser by standard shipping methods at Manufacturer's 
discretion.  Express shipping will be at the expense of the Purchaser.  If Purchaser resides 
outside the contiguous US, return shipping shall be at Purchaser's expense.   

No other warranty, express or implied other than Manufacturer's shall apply. 

Manufacturer does not assume any responsibility for consequential damages, expenses or loss of 
revenue or property, inconvenience or interruption in operation experienced by the customer 
due to a malfunction of the purchased equipment. No warranty service performed on any 
product shall extend the applicable warranty period. 

This  warranty  does  not  cover  damage  to  the  equipment during shipping and Manufacturer 
assumes no responsibility for such damage. 

This product warranty extends to the original purchaser only and will be null and void upon any 
assignment or transfer. 

 

Aurora Multimedia Corp. 

205 Commercial Court, Morganville, NJ 07751 

Phone: (732) 591-5800    Fax: (732) 591-5801 

www.auroramultimedia.com 

Limited Warranty

Summary of Contents for Aspyre ASP-44

























Reviews: