Aurora Multimedia ASP-FIBRS2, User Manual, Page: 6 / 8

~ 5 ~
1. Connect your HDMI source to the HDMI input connector on ASP-FIBRS2-TX side.
2. Connect your HDMI display to the HDMI output connector on ASP-FIBRS2-RX side.
3. Plug the crystal fiber to both TX and RX SC Duplex fiber connectors.
4. If serial control is required, connect the serial cabling at each end.
5. Power up your HDMI source, display and the ASP-FIBRS2.
6. When connection is built, the Status Indicator will become solid and video will be shown
on the display side.
Hardware Installation