~ 9 ~
1.
Connect your HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit
ASP-CATx2-TX.
2.
Connect the IR blaster to the transmitting unit ASP-CATx2-TX, and make the IR blaster
directly point to the IR sensor of the HDMI source device(s).
3.
Connect your HDMI or DVI display (such as a LCD or plasma HDTV) to the receiving unit
ASP-CATx2-RX.
4.
Connect the IR receiver to the receiving unit ASP-CATx2-RX, and make the IR receiver
directly point to the user.
5.
Connect two Cat-5/5e/6 cables between the transmitting and receiving units via
A/V
SIGNAL
and
CTRL CHANNEL
ports respectively.
6.
Make sure your Cat-5/5e/6 cables are tightly connected and not loose.
7.
Plug in 5V DC power cord to the power jack of the receiving unit ASP-CATx2-RX.
8.
If you see flickering or blinking image on the display, please adjust the rotary control
switch to improve the cable skew. 0 stands for the strongest HDMI signal level for
longest possible transmission length while 7 stands for the weakest HDMI signal level
for short transmission length. Please adjust the signal level from 7 to 0 and stop
turning the rotary switch whenever the audio/video is playing normally. Inappropriate
signal level setting may cause overpowering issue that would shorten the product life
significantly!
Hardware Installation
