Aurora Multimedia ASP-CATX1 User Manual Download Page 3

~ 2 ~ 

 

 

 
 

The ASP-CATX1 HDMI boosts HDMI transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in 

HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36-bit color depth. With only one cost effective UTP cable, users 
can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources 
compliant with TMDS standard to distant display monitors including HDMI/DVI supported TV sets or LCD PC monitors. With 
the state-of-the-art Silicon Image chipsets embedded, Deep Color video, DTS-HD or Dolby TrueHD audio, HDCP and HDMI 
compatibility are all further insured. This flexibility makes HDCP compliant DVD players or PS3 transmit utmost high quality 
video and audio over a great distance at the minimal cost. 

The ASP-CATX1 includes two units: transmitting (ASP-CATX1-TX) and receiving (ASP-CATX1-RX) units. The 

transmitting unit is used to capture the input HDMI/DVI signals and carry the signals over one cost effective Cat-5/5e/6 
cable. The receiving unit is responsible for equalizing the HDMI multimedia data. The transmission range between the 
sending and receiving units can be up to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 
8-level equalization rotary control switch for adjusting the strength of the HDMI signal level on the receiving unit, users can 
get the optimal audio/video quality accordingly, and therefore optimize the transmission range between HDMI source and 
display. 

 

Features

 

z

 

State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability 

z

 

HDMI 1.3c compliant 

z

 

Extend the transmission length up to 60m (200ft) from the HDMI sources under HD resolution (1080i or 720p at 24-bit 
color depth) 

z

 

Extend the transmission length up to 40m (130ft) from the HDMI sources under Full HD resolution (1080p at 24-bit 
color depth) 

z

 

Extend the transmission length up to 20m (65ft) from the HDMI sources under Full HD resolution (1080p at 36-bit color 
depth) 

z

 

HDCP 1.1 compliant 

z

 

Minimize the cable skew by adjustable 8-level equalization control 

z

 

Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission 

z

 

DTS-HD and Dolby True HD high bit rate audio support 

z

 

Allows cascading 

z

 

Wall mounting housing design for easy and robust installation 

z

 

Perfectly integrated with other HDMI over CAT series products 

 

The

 

length

 

depends

 

on

 

the

 

characteristics

 

and

 

quality

 

of

 

the

 

cables.

 

Higher

 

resolutions

 

and

 

longer

 

transmission

 

distances

 

require

 

low

 

skew

 

cables

 

(<25ns/100m)

 

for

 

best

 

performance.

 

Unshielded

 

CAT6

 

with

 

metal

 

RJ

45

 

connectors

 

is

 

recommended.

 

Introduction

Summary of Contents for ASP-CATX1










Reviews: