~
15
~
RS-232 Communication settings & protocol:
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity: none
Command
Types
Command
Codes
Functions
System
Command
/*Type;
Request model’s information
/%Lock;
Lock the keyboard of control panel on the Matrix.
/%Unlock;
Unlock the keyboard of control panel on the Matrix
/^Version;
Request firmware version
/:MessageOff; Turn off feedback. It will only show “Switcher OK”
/:MessageOn; Turn
on
feedback
EDIDMOn.
Manually adjust the EDID with the most priority output
port.
EDIDMInit.
Recover the factory default EDID data
Undo. Cancel
previous
operation
Demo.
Switch to “demo” mode, 1->1, 2->2, 3->3 …
[x1]All.
Transfers all signals from input channel [x1] to all output
channels
All#.
Transfers all input signals to the corresponding output
channels respectively.
All$.
Switches off all output channels.
[x1]#.
Transfers signals from input channel [x1] to output
channel [x1].
[x1]$.
Switches off output channel [x1].
Operati
on Co
mm
an
d
[x1] V[x2].
Transfers video signals from input channel [x1] to output
channel [x2].
[x1]
V[x2],[x3],[x4].
Transfers video signals from input channel [x1] to output
channels [x2], [x3] and [x4].
[x1] A[x2].
Transfers audio signals from the input channel [x1] to the
output channel [x2].
[x1]
A[x2],[x3],[x4].
Transfer the audio signals from the input channel [x1] to
the output channels [x2], [x3] and [x4].
[x1] B[x2].
Transfers both video and audio signals from input
channel [x1] to output channel [x2].
[x1]
B[x2],[x3],[x4].
Transfer both video and audio signals from input channel
[x1] to output channels [x2], [x3] and [x4].
Status[x1].
Request input channel for output channel [x1].
Status.
Request input channel for output channels one by one.
Communication Protocol
