10 GB
Switching off the alarm signal
Press any button except the SNOOZE button
20
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
Note:
The alarm signal switches itself off after
2 minutes.
Displaying the temperature
in °C / °F
The current inside temperature
7
is indicated on
the LCD.
Press the DOWN button
22
to switch between
the Celsius and Fahrenheit temperature scales
7
.
Moon phase (Model B only)
The LCD radio-controlled wall clock shows the current
moon phase
8
in the LC display (Model B only).
It uses the following symbols:
Full moon
Waning
gibbous
Last quarter
Waning
crescent
New moon
Waxing
crescent
First quarter
Waxing
gibbous
Displaying summertime
Summertime is automatically indicated on the LCD
by the summertime icon
4
. The clock receives
the information as to whether it is summertime or not
from the DCF radio signal.
Note:
Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings.
Setting the time zone
Press and keep pressed the DOWN button
22
for
about 2 seconds. The time zone symbol
5
is displayed.
Press and keep pressed the SET button
25
for
about 3 seconds. The hour display flashes.
Press the UP
23
or DOWN button
22
to set
the desired hour value.
Press the SET button
25
to confirm your setting.
Note:
Press and keep pressed the DOWN button
22
for about 2 seconds to deactivate the time zone
function.
Troubleshooting
This appliance has delicate electronic compo-
nents. This means that if it is placed near an
object that transmits radio signals, it could cause
interference. This could be, for example, mobile
telephones, walkie talkies, CB radios, remote
controls and microwaves. If the display indicates
a problem, move such objects away from it.
Electrostatic discharges may cause malfunctions.
In the event of such malfunctions, remove the
batteries briefly and reinsert them.
Cleaning and Maintenance
Under no circumstances should you use liquids
or detergents, as these will damage the device.
The device should only be cleaned on the out-
side with a soft dry cloth.
Operation / Troubleshooting / Cleaning and Maintenance
