15
GB/IE/CY
j
Insert two 1.5 V batteries (AA) (included) in
the battery compartment
25
.
note:
make sure that the polarity is correct.
This is indicated inside the battery compartment
25
(see Fig. C).
- The external sensor is now ready for operation
and the indicator LED
23
lights up briefly.
j
Close the battery compartment cover.
Installing the weather station and / or
external sensor on the wall:
note:
you will need an electric drill for this step of
the installation.
m
CaUTIOn! DanGER TO LIFE, RISK OF
InJURY anD MaTERIaL DaMaGE!
Read the
operating and safety instructions for your drill care-
fully.
WaRnInG!
DanGER TO LIFE!
Take care
that you do not hit electricity, gas or water lines when
you drill into the wall. If necessary, check with a pipe
and cable detector before drilling.
Q
Setting up the weather station
Inserting the batteries:
j
Open the battery compartment
21
on the back
of the weather station.
