15
GB/IE
In clock mode press the RADIO button
3
. The light alarm clock is
now in radio mode. The display
2
will show the frequency.
Press and hold the + button
12
or the — button
13
for 3 seconds.
The radio will start scanning for stations. The station scan will stop
on the first station found.
Hold the + button or the — button for approx. 3 seconds to continue
the station scan.
Press the VOL+ button
4
to increase the volume. Press the
VOL— -button
5
to decrease the volume.
Arrange the cable aerial
17
for optimal radio reception.
Press the RADIO button to change from radio mode back to clock
mode.
Save station
There are eight memory buttons for saving stations. These memory
buttons are available when the light alarm clock is in radio mode.
To save a station hold the RADIO button
3
for 3 seconds. The
display will flash the memory location suggested by the radio.
Use the VOL + button
4
or the VOL - button
5
to select the location
you wish to save to. Confirm your entry by pressing the RADIO button.
To recall a saved station repeatedly press the TEST button
11
with
the light alarm clock in radio mode until the desired memory loca-
tion appears in the display.
When switching the radio off by pressing the RADIO button, the
radio will play the last station selected when turned back on.
