AFT 77 B2
US - EN
│
13
■
If the outdoor temperature is not displayed within approx. 3 minutes,
the temperature station will stop searching for reception.
The reception icon
turns off and
is displayed on the outdoor
temperature panel
r
. The system likely cannot detect a signal due
to structural conditions or because the sensor is too far away.
If the device is unable to automatically connect to the outdoor sensor,
you can establish a connection manually:
♦
Press and hold the
button
0
until the reception icon
flashes
on the outdoor temperature panel
r
.
♦
Press the
TX
button
d
to manually start the wireless signal for the
outdoor sensor.
The temperature station automatically starts to receive the WWVB signal
after 3 minutes, regardless of whether the outdoor sensor reception
search was successful or not.
The reception icon flashes on the time panel
6
. If the reception
icon is not flashing completely ( ) on the display
4
, it means that
the reception of the WWVB signal is too weak and the time cannot be
synchronized. Try to find a set-up location where the reception icon ( )
flashes completely on the display
4
. If the WWVB signal is being
received correctly, the current Coordinated Universal Time (UTC) is dis-
played on the time panel
6
and the date and weekday are displayed
on the date panel
8
. In addition, the reception symbol is permanent-
ly displayed on the time panel
6
.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 13
_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 13
10.09.20 15:34
10.09.20 15:3
