- 5 -
Band shortening instruction for metal
straps
Band shortening can be accomplished by removing links.
Open the band clasp safety and open the clasp. The
band is held to the clasp by a spring bar.
Image 1.
compress and remove the spring bar by using a pointed
tool. Now place the watch face down on a soft surface.
Image 2.
The links that can be removed are marked
with an arrow.
Image 3.
Place the band in the band
changing tool in such a way that the pointed end of the
tool points directly at the metal rod. Turn the screw in the
direction of the arrow until the metal rod is pushed out a
small distance. The rod can now be pulled out (using
pliers if necessary). The strap can now be taken
disassembled. Remove as many links as necessary using
this method. Reinsert the rod in the opposite direction of
the arrow and push it back into the band. The strap and
clasp can now be reassembled.
- 6 -
An instructional video is available for online viewing at
the following URL:
http://www.lidl.com/nou9nohN
...or simply scan the following QR code:
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free cloth. A
glasses cleaning cloth is ideal.
Replacement of battery (SR626SW)
Battery replacements must be performed by an expert to
avoid damaging the case or gaskets.
Water resistance
Water resistant up to 3 bar. The bar value specifies the
atmospheric overpressure which is applied during testing
(DIN 8310).