16
17
1 2
3 4
Press the PUSH button to open
the paper cover.
Pull a short length of paper out of
the printer and close the cover.
Insert the paper in the correct
direction. See the image above.
Tear off the additional paper using
tear bar.
4-7 Paper Installation
1 2
3
NOTE
Turn off the power by pressing
the power button for approximately
3 seconds.
The self-test will print.
While you are holding the FEED
button, press the power button.
4-8 Self Test
1. To enter hex dump mode, press the Feed
button once more
2. If the Feed button is not pressed,
the self-test will automatically finish
after 3 seconds.
