10
Connecting the Display (Figure 10.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is turned off.
2. Connect the AC power cord to the power connector on the monitor and the other end
into an electrical outlet (10.1).
3. Connect the D-SUB or DVI cable from the display’s VGA input connector to the D-SUB
or DVI connector of your host computer and tighten the screws (10.1).
4. Connect the Audio-In cable from the audio input port of your display to the Audio-out port
of your computer (10.1).
5. Connect the USB cable from USB port of your display to USB port of your computer (10.1).
6. Once the touch screen is configured, the monitor is ready for use.
!
Notice!
To ensure the LCD display works well with your computer, please configure the
display mode of your graphics card to make it less than or equal to 1920 x 1080
resolution and make sure the timing of the display mode is compatible with the LCD
display.
We have listed the compatible “Video Modes” of your LCD display in the appendix
(on page 18) for your reference
.
Summary of Contents for LCDWIDE 32 inch FP Series
Page 1: ...LCDWIDE 32 FP Series Touch Screen LCD Monitors USER s GUIDE Rev B...
Page 14: ...11 Figure 10 1...
Page 24: ...21...
