-8-
1
2
3
4
5
6
1.5. Product Description
1.5.2. Rear Panel
Figure 2. X725 Rear Panel
In the rear panel of the X725, there are the USB audio input, optical
SPDIF input, speaker binding posts, power ON/OFF switch and mains
power inlet as shown in Figure 2.
Table2. X725 Rear Panel
The maximum output of the Aurender X725 is rated at 250W per channel
at 4Ω. Caution should be taken when connecting the speaker cables.
The X725 should always be turned off before making any connections
and ensure that the left and right speakers are connected to the proper
binding posts.
The direct current received through the USB input is less than 5V
100mA.
The mains voltage of the Aurender X725 can be set at either 220V
or 110V AC at the factory. Products set to accept 110V must not be
labelled 220V.
1. Introduction
X725 Rear Panel
Right Speaker Output
USB 2.0 type B connector
Optical SPDIF input
Left Speaker Output
AC Power Switch
AC Inlet
1
2
3
4
5
6
