XTR-8LR-USB
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
User Manual
The technical features can change without forecasting. AUR°EL S.p.A doesn’t assume any responsability of demage due to the improper use of the device.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
AUR°EL S.p.A.
Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 1.3 18/11/2019
Page
7
of
17
1.
Install computer drivers for the USB port, for this purpose use the following link
http://www.ftdichip.com/Drivers/D2XX.htm
taking care to identify the appropriate driver for your
operating system from the PC.
2.
Connect the
XTR-8LR-USB
to the PC's USB port: the computer should report the detection of
USB and communicate the outcome of the installation of the drivers and the COM number in
use. If this were not reported, so it is advisable to open the Windows page about managing
devices, click on the "Port (COM menu and LPT)", right-click on the installed USB ports, and
the properties of each of them, seek COM associated with the FTDI driver.
