RX-AM4SF
---------------------------------------------------------------------------------------------------------------------------------------------------
Instruction Manual
Pin.13 “RSSI” Output
In fig.2 it is reported grafically the behaviour of the voltage at the RSSI output in function of the
power of the input signal, in High Gain mode (pin 11 at logic level 0). In fig 3 it is shown the
equivalent diagram but in Low Gain mode (pin 11 at logic level 1).
Both the diagrams have been obtained experimentally applying at the RF input (pin 3) of the
receiver a square wave AM-modulated, with a modulation index of 99%, drawn directly from a
signal generator, and connecting a 10uF capacitor between the pin 11 and GND .
RSSI Output
1,00
1,20
1,40
1,60
1,80
2,00
2,20
2,40
2,60
2,80
-110
-100
-90
-80
-70
-60
-50
Received Power (dBm)
RSSI Level (V)
Fig. 2
: RSSI output with high gain
RSSI Output
1,00
1,20
1,40
1,60
1,80
2,00
2,20
2,40
2,60
2,80
-100
-90
-80
-70
-60
-50
-40
-30
Received Power (dBm)
RSSI Level (V)
Fig. 3
: RSSI output with low gain
Le caratteristiche tecniche possono subire variazioni senza preavviso. La AUREL S.p.A non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
15/02/2005
AUREL S.p.A.
Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Pag 3 di
6
