4
RF-PBO-16
Owner’s Manual
Vertical Setup
1. If the L bracket is not attached
to the filter: Align the slot on the
flat side of the L bracket with the
screw holes on the back of the
filter. Tighten the two locking
screws until secure.
1
2. Screw one of the thumbscrews
onto the threaded post of the mic
stand.
2
3. Place the thumbscrew’s
threaded post through the slot
on the L bracket.
3
4. Attach the second thumbscrew
to the first thumbscrew to secure
the filter. Tighten until secure.
3
5. Screw the extender onto the post
of the top thumbscrew.
4
6. Attach your shock mount to
the extender, and secure it by
tightening the star nut. Mount
your microphone into the shock
mount.
Instructions
1
2
3
4
