Owner’s Manual
Setting Up the Filter
1.
Unfold the tripod legs and place the stand on a secure, flat surface.
2. Place the filter’s bracket onto the stand’s
threaded stud.
3. Hold the filter in place and screw the
extender onto the stand’s threaded stud.
4. Screw the 5/8-inch adapter onto the
top of the extender, and tighten the
extender’s star nut until secure.
4
Mic Clip and Standard-Sized Shock Mount
1.
Position your mic clip or shock mount
in upright position, and screw onto the
5/8-inch adapter.
1
2. Center your mic clip or shock mount
with the filter, and tighten the adaptor’s
star nut until secure.
2
3. Mount your microphone onto the shock
mount, making sure that it’s secure
before proceeding.
4
1
4
RF-DT-10
Attaching a Mic Clip or Shock Mount
and Microphone
2
