Reflection Filter
RF-CPB-18
Owner’s Manual
This AURAY product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer use
for a period of one (1) year from the original purchase date or thirty (30)
days after replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be limited solely to
repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have additional rights that vary
from state to state.
To obtain warranty coverage, contact the Auray Customer Service
Department to obtain a return merchandise authorization (“RMA”) number,
and return the defective product to Auray along with the RMA number and
proof of purchase. Shipment of the defective product is at the purchaser’s
own risk and expense.
For more information or to arrange service, visit www.aurayaudio.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
AURAY is a registered trademark of the Gradus Group. © 2014 Gradus Group LLC. All Rights Reserved.
One-Year Limited Warranty
GG1
Attaching the Microphone
1. Attach a shock mount or microphone clip
to the threaded stud of the smaller 5/8"
adapter that extends above the sliding
mounting bracket.
4
2. Once you are sure it is securely attached,
you can insert the microphone into the
shock mount or mic clip.
Adjusting the RF-CPB-18 to the Microphone
For the RF-CPB-18 to be the most effective, the microphone diaphragm
should be as close to the shield as possible, and it ideally should be
centered vertically. Before adjusting the position of the shield, remove
the microphone from the shock mount or mic clip and set it aside on a
secure surface. To adjust the position of the shield, do the following:
1. Slightly loosen the locking wheel and slide
the shield to the desired distance from the
microphone.
5
2. Once the shield is in place, securely
tighten the locking wheel and return the
microphone to the shock mount or clip.
To adjust the height of the shield, do the
following:
1. Release the adjusting lock on the back of
the shield by sliding it up approximately
1/2" until it clicks.
6
2. Lift the shield to extend the adjustment rail
to the desired height.
3. Lock the shield into place by pressing the
adjusting lock down until it clicks into its
original position.
4. After making sure the RF-CPB-18 is secure, return the microphone to
the shock mount or clip.
Desktop recording
The RF-CPB-18 is ideal for desktop recording applications like
voiceovers, broadcasting and podcasting. For the best desktop recording
results with the RF-CPB-18, use a desktop mic stand with a weighted
metal base to ensure stability of your microphone and reflection filter.
To attach the RF-CPB-18 to a desktop microphone stand, follow the
directions for assembling and mounting on page 4.
5
6
5
RF-CPB-18
RF-CPB-18
Owner’s Manual
Owner’s Manual
6
4