4
RF-C12
Owner’s Manual
Setting up the RF-C12
1. Screw the telescoping shaft into
the threaded mount of the stand
until tight.
1
2. Seat the sliding assembly over the
threaded mount, and use one of the
5/8-inch adapters to secure it.
2
3. Remove the extender endcap.
3
2. Then loosen the assembly’s
twist lock, and slide the extender
through the twist lock.
3
4. Tighten the lock, and replace the
endcap.
3
5. Attach the isolation filter to the
3/8-inch threaded mount on the
adapter. You may need to loosen
the locking wheel and the adapter
to achieve a front-facing filter
orientation.
4
Instructions
1
3
2
4
