3
ISO-BUBBLE
Owner’s Manual
Specifications
Setting Up the Bubble
1.
Remove the pop screen from the
front of the Bubble.
1
2. Insert the microphone through
the front of the Bubble, and press
the bottom end of the microphone
through the microphone hole.
Make sure the microphone is
facing forward and that the
capsule is vertically centered.
2
If your microphone has buttons or
switches, keep them exposed above the
microphone hole for easy access.
The microphone should fit snugly into the
hole and should be held securely in place
by the foam.
Note:
If the hole is too loose, insert the foam
adapter into the hole first, and then insert
the microphone through the hole.
3
3. Place the assembly onto your
microphone’s shockmount, and
connect the microphone cable.
4
4. Replace the pop screen. You’re
ready to record.
2
3
4
1
Material:
High-density open-cell acoustic foam
Dimensions (H × W × D):
7.1 × 8 × 7 in. (18 × 20.3 × 17.8 cm)
Weight:
5.3 oz. (150 g)
