the hour and minute will display 2 seconds in order. The
OGM on LCD will blink if there has new message.
1. Mode Change :
Press K4 (>/Scan) to enter Time Mode. Press K3 (</Rep) to
enter To Do Mode.
2. Recording Mode :
Press K1 (Rec/Stop /Pause) to enter Recording Mode. The
indicated LED is light. It will display the “
●
”
and the
recording time. If there is no voice in 8 seconds at first,
it will quit Recording Mode to avoid accidental operation.
a. Press K2 (Play/Stop/Pause) for more than 1 second to
PAUSE. If no key pressed in 30 minutes, it will quit
Pause mode. And it will release PAUSE Mode and continue
to record if press it again. It will display “FULL” if
199 messages are fully recorded or the maximum recording
time is reached, recording is no more possible.
b. Press K1 (Rec/Stop/pause) to stop record and release
Record Mode. It will display the remainder time.
3. Look-up :
a. Press K5 (+/Mode/^) or K6 (-/v) for less than 2 seconds,
it will display the time of recorded messages. In this
time you can use the function of Look-up.
b. Press K5 (+/Mode/^) or K6 (-/v) for less than 1 second,
you can loop-up the messages in order, it will display
the number of current message and the time of the message
recorded. The OGM will blink if the message is new.
4. Play Mode :
Press K2 (Play/Stop/Pause) to play back the current
message. It will display the time of the message played.
You can get higher quality if use the earphone.
a. Press K2 (Play/Stop/Pause) for more than 1 second to
enter PAUSE Mode, the PAUSE on the LCD will blink. If
no key pressed in 30 seconds, It will quit Play Mode,
It will release pause function and playback will resume
if press it again.
b. Press K3 (</Rep) for more than 1 second and not release
