Aura MW 18, Safety Instructions And Operation Manual

Page: 3 / 11

2
Introduction
Congratulations on your purchase of the AURA MW Series Infrared Heater. The AURA MW Series
utilizes a shortwave trechnology that heats people, objects and thngs and not the air. This allows for
energy effecient operation for you patio, garage or workspace.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk
of fire, electric shock, or injury to persons, etc.
Read through the operation and assembly instructions conscientiously before operating the appliance.
Be sure to keep the manual in a safe place for future reference. If you pass the appliance on, pass on
the instructions too.

Check if the voltage indicated on the nameplate of the appliance corresponds to the local mains
voltage before you connect the appliance.

The power supply to the appliance should correspond to the relevant regulations of the power supply
companies and the regional construction regulations.

Extension cords and multi-sockets may be used only if care is exercised in their use. The marked
electrical rating of the extension cord or multi-socket should have adequate current carrying capacity
and correspond to the relevant regulations of the power supply companies and the regional
construction regulations. Check if the voltage indicated on the appliance corresponds to the marked
electrical rating of the extension cord or multi-socket before you connect the appliance.

The appliance is not located immediately below a wall socket-outlet.

Never install this appliance close to anything flammable, such as furniture, curtains, etc.

In order to avoid overheating and fire hazard, do not cover or obstruct the appliance. Do not put any
of the following materials on the appliance, such as clothes, blanket, pillow, paper etc. The minimum
distance 1M between the appliance and flammable materials must always be maintained.