13
End call
To reject an incoming call or end a conversation, press and
hold the button (7) .
Switch between phone and speakerphone
During a call, press the button (7) to transfer the audio signal from the
speakerphone to your phone or from the phone to the speakerphone.
Calling the last dialed number
Press and hold the button (7) on the receiver to call the last number in the list
of outgoing calls on your phone.
Press the button (7) on the receiver to activate the Siri function.
Volume control
Rotate the volume knob during a call to adjust the volume level.
Press the button (15) to mute the sound.
Bluetooth music (A2DP)
The AMH-600BT receiver supports the Bluetooth A2DP audio transmission protocol.
After successfully pairing your mobile device with the receiver, you will be able
to play music from your phone on the car audio system.
To switch tracks, press buttons (9) or (2) .
To stop playback, press the button (19) .
AUX
You can connect an external source to the 3.5mm jack on the front of the receiver
using the AurA AUX cable (optional).
Reset settings
(
reset)
Remove the front panel.
Press the button (22)
reset
to reset the device to factory settings.
