Auping Kiruna Sami, User Manual

Page: 22 / 86

GB7
The remote control is used to adjust
the electrically adjustable sections*
(see fig. 8 and 9).
P ress one of the 'up' or 'down'
buttons, holding it down until the
desired position is reached. Only one
button can be operated at a time.
1. Raise head rest*
2. Lower head rest*
1. Raise back section
2. Lower back section
3. Raise foot end
4. Lower foot end
5. Raise back section and foot end
6. Lower back section and foot end
*If applicable
4. Use*
While an electrical malfunction may be
a nuisance, it is not dangerous. The
motor is fitted with all necessary
safety provisions and has double
insulation.
5.1 Electrical breakdowns*
Check that:
- the plug is in the socket
- the current is switched on at the
mains
- the battery of the infrared remote
control is charged
- the infrared receiver is not
obstructed
- the frequency of the infrared receiver
is the same as that of the infrared
receiver. The remote control and the
receiver are fitted with a frequency
switch. The switches can be
recognized from the red slider.
E n s u re that the switches of the
transmitter and the receiver are set
to the same side.
The infrared remote control cannot be
used simultaneously with other
infrared remote controls.
5. Breakdowns
fig.8 fig.9
1
3
5
2
4
6
2
4
6
8
1
3
5
7