3. PRESS AND HOLD MODE BUTTON FOR 3-5 SECONDS; 12H / 24H WILL BE FLASHING. PRESS
SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT 12H / 24H MODE. PRESS MODE
BUTTON AGAIN TO CONFIRM.
4. SETTING HOUR: PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE CORRECT
HOUR. PRESS MODE BUTTON AGAIN TO CONFIRM.
5. SETTING MINUTE: AFTER STEPS 2 & 3 ARE COMPLETED, PRESS SKIP DOWN
BUTTON OR
CD 1 - SKIP UP BUTTON TO SELECT CORRECT MINUTE. PRESS MODE BUTTON AGAIN TO CONFIRM.
SETTING ALARM
1. DURING STANDBY MODE, HOLD TIMER BUTTON FOR 3-5 SECONDS. SETTING THE ALARM SEQUENCE
IS “ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME”.
2. SETTING ALARM ON TIME: “ON” IS ILLUMINATED ON THE DISPLAY
i. SETTING HOUR: PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE
CORRECT HOUR, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.
ii. SETTING MINUTE: PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE
CORRECT MINUTE, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM
3. SETTING ALARM OFF TIME: “OFF” IS ILLUMINATED ON THE DISPLAY:
iii. SETTING HOUR: PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE
CORRECT HOUR, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.
iv. SETTING MINUTE: PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE
CORRECT MINUTE, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.
4. SETTING ALARM MODE: “TUNE”, “CD”, “USB” OR “CARD” IS ILLUMINATED ON THE DISPLAY:
v. PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE ALARM MODE, THEN
PRESS TIMER BUTTON AGAIN TO CONFIRM.
vi. “TUNE”, “CD-1”, “USB” OR “CARD” (=SD CARD) ARE AVAILABLE FOR ALARM MODE SELECTION.
5. SETTING ALARM VOLUME: “V - ” IS ILLUMINATED ON THE DISPLAY:
i. PRESS SKIP DOWN
BUTTON OR SKIP UP
BUTTON TO SELECT THE ALARM VOLUME,
THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.
6. WHEN SETTING THE ALARM IS COMPLETE, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR
CLARIFICATION.
7. “CLOCK” ICON WILL BE FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN
ALARM SETTING IS STORED BUT NOT IN ACTIVE YET.
8. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS TIMER BUTTON,
“CLOCK” ICON WILL TURN OFF.
SNOOZE FUNCTION
PRESS SNOOZE BUTTON WHEN ALARM IN ACTIVE, ALARM WILL BE SLIENT FOR 10 MINUTES. AFTER
10-MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN BE USED FOR RE-
PEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL.
TIMER FUNCTION
1. WHEN THE UNIT IS TURNED ON (STANDBY INDICATOR LIGHT IS OFF), PRESS SLEEP BUTTON
REPEATEDLY TO CHOOSE THE DESIRED SLEEP TIME MINUTES FROM 90>80>70…..>10 OFF.
2. SLEEP TIME SETTING IS STORED WHEN THE “SLEEP” ICON LIGHTS UP ON THE DISPLAY.
17
