auna Microstar 10035301, Manual

Page: 39 / 114

39
EN
BT OPERATION
Bluetooth wireless technology is a short-range radio technology that
enables wireless communication between various types of digital devices,
such as mobile phone or computer. It operates within a range of about
10meters (30 feet) without the hassle of having to use cables to connect
these devices. Since the Bluetooth technology does not require line of
sight between the communicating devices, it is not necessary to line up the
transmitting device and the receiver, as in the case of infrared technology.
Communication System and Bluetooth Profile of this unit
There are many available Bluetooth Profiles describing the basic
communication methods, specific functions and uses, to enable
communication between devices.
This unit supports the following:
Communication System: Bluetooth Specification version 5 Bluetooth
+Enhanced Data Rate (EDR) Profile : A2DP (Advanced Audio Distribution
Profile) A2DP enables audio streaming from an A2DP equipped Bluetooth
stereo audio source device (eg mobile phone) to this unit. By converting
wireless stereo audio signal to analogue audio signal, you can enjoy
listening to the sound through this speaker system. AVRCP (Audio/Video
Remote Control Profile) is a technology that allows a single remote control
to control all Bluetooth enabled Audio Video equipment to which a user has
access.
Notes when using unit with a mobile phone:
• This unit cannot be used to talk over the telephone even when there is a
Bluetooth connection made to a mobile phone.
• Please refer to the operating manual supplied with the mobile phone for
details on operation of your mobile phone while transmitting the sound
using a Bluetooth connection.
Pairing Bluetooth devices:
• Bluetooth devices need to be initially paired first before they can
exchange data. Once paired, it is not necessary to pair them again
unless:
• Pairing is made with more than 8 devices. Pairing can only be made one
device at a time. This unit can be paired to a maximum of 8 devices. If
subsequent device is paired, the oldest device paired, will be deleted
and replaced with the new one.
• This unit is reset. All pairing information is deleted when unit is reset.
• Pairing information is deleted while re-pairing, etc.