auna MD-130, Manual, Page: 15 / 34

15
Installation
• Choose the mounting location where the unit will not interfere with the normal driving.
• Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up
properly and the unit and the system work properly.
• Consult your nearest dealer if any other modifications of the vehicle are required.
• Install the unit where it does not get in the driver‘s way and cannot injure any passenger.
• If installation angle exceeds 30 from horizontal, the unit might not give ist optimum performance.
• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or
from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from „Front“(conventional DIN Front-mount) or „Rear“(DIN Rear-
mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the
followingillustrated installation methods.