auna Akkord 10029895, Instructions Manual

Page: 19 / 31

19
Additional Functions
Reset
If moving the radio to another location in the country the pre-tuned and stored DAB stations may no longer
be available and it will be necessary to reset the radio back to the factory settings.
With the unit switched on, press and hold the MENU button and press the arrow buttons until the display
shows ‘System’. Then press SELECT scroll down to “Factory Reset <No> Yes" . Select YES, then press SELECT.
The radio will display “Restarting….” and will then go into standby mode.
Note
: All stored programmed
stations will be lost during reset.
Dimmer
Press the DIMMER button repeatedly to cycle through “Off / Low / Medium / High” dimmer setting.
USING HEADPHONES (not included)
A stereo headphone jack has been provided so that the radio can be used without disturbing others.
Plug in the headphones in the headphones jack on the device back. Adjust the listening volume to your cho -
sen level. Excessive sound pressure from earphones and headphones can cause hearing loss. The speakers
will not operate when earphones are fitted.