28
EN
Factory reset
1. Hold and press MENU|INFO to enter menu. Rotate the TUNING knob
to "System" showing on the display. And then press
to
enter.
2. Rotate the TUNING knob to "Factory reset" position and press
to enter.
3. Rotate the TUNING knob to select "Yes" . And the press the
to confirm factory reset.
SW Version-Software Version Display
1. Hold and press MENU|INFO to enter menu. Rotate the TUNING knob
to "System" showing on the display. And then press
to
enter.
2. Rotate the TUNING knob to "SW version" position and press
to enter.
3. The system software version will be displayed.
Alarm Setting
1. Press or and then press
to enter alarm setting.
2. Rotate the tuning knob to cycle through the below options.
•
On/Off
: Press
to turn the alarm on/off.
•
Time
: Rotate the TUNING knob to "Time" position and press
to enter. And rotate the TUNING knob to set time and
press the
to confirm.
•
Days
: Rotate the TUNING knob to "Days" position and press
to enter. And rotate the TUNING knob to select the
available options:Daily, Once, Weekdays, Weekends and press
to confirm.
•
Mode
: Rotate the TUNING knob to "Mode" position and press
to enter. And rotate the TUNING knob to select the sound
source of the alarm. Source options: DAB, FM, Buzzer. And then press
to confirm
•
Volume
: Rotate the TUNING knob to "Volume"position and press
to enter. And rotate the TUNING knob to select the alarm
volume level and press
to confirm.
•
Last listened
: Rotate the TUNING knob to "Last listened" position and
press
to enter. And rotate the TUNING knob to select the
desired preset station as alarm source. And press the
to
confirm.(Note: The function is available when the preset station is set.)
•
Save
: When the above setting is finished, rotate the knob the "Save"
position and press the
to save the alarm setting. When
the alarm setting is active, the corresponding alarm 1 or alarm 2 icon
