auna 10030313, Manual

Page: 25 / 106

25
www.auna.de
Getting Started and Setup Wizard
Please ensure the following is ready:
• You have a broadband internet connection and a wireless (Wi-Fi) broadband router is connected to
the internet successfully.
• The radio supports Wireless B ,G and N connection (Wireless N router can also be used with the
setting on B or G).
• You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/
password. You need to key in the correct code when the radio is connected to the wireless router for
network connection. If you do not know the code/password, please contact the person /technician
who set up the router/network for you.
• The radio can work via Wireless network connection (Wi-Fi connection)
Getting Started
Connect the AC adaptor supplied in the package to the DC jack at the rear side of the radio.
The radio is an adaptor and does not have internal speaker. Prepare a powered speaker which has the
3.5mm pin to plug in to the 3.5 mm line out jack on the radio.
The radio supports also the optical connection. If you have a system comes with optical input, connect
to the optical out on the radio to listen
1
Switch the radio on using the
Power on/off switch. The radio
will power up and the display on
the front will light up and display
as follow:
2
Select YES to start the wizard,
select No to set up manually. If
you select YES, it will start setting
the date and time by choosing
the 12 or 24 hour format, update
the time from Network (this
option is recommended) or you
can set the time manually by
selecting No Update.