auna 10029159, Manual

Page: 27 / 76

27
EN
GETTING STARTED
• Insert two AA batteries into the battery compartment at the bottom
of the unit. These are not absolutely necessary for operation, but they
supply the memory chip (transmitter memory) and the clock with power
whenever the unit is switched off.
• Insert the supplied button cell (battery type CR2025) into the remote
control according to the following diagram:
• There is a magnetic surface on the right-hand side of the radio housing
to which you can attach the remote control if required:
• Connect the mains cable to an ordinary household socket and unroll the
radio antenna for best possible reception.
• Switch the device on by pressing .