Operating Determinations
The Auna wireless microphone systems encloses one microphone with integrated transmitter which serves for
wireless signal transmission to the receiving unit. The systems operate within the VHFspectre (174 - 216 MHz). The
transmission range is approx. 100 m and depends on the local conditions. The units were designed for indoor use.
Approval
This wireless microphone system was tested in accordance with the European standards EN 300422-
1 V1.3.2, EN 300422-2 V1.2.2, EN 301489-9-1 V1.8.1, EN 301489-9-1 V1.4.1 and EN 60065:
2002+Al, EN 60065: 2006+All, EN 60065: 2008+A2: 2010, EN 62479: 2010. Consequently, this
product adheres to the R& TTE directive of the European Union and does not need an individual EC
type examination of every member state. The approval number is
In some countries, the operation of this wireless system needs to be approved by the national telecoms regulatory
authority. In Germany, it is necessary to apply for a frequency assignment at the
corresponding branch of the Federal Network Agency (BNetzA). The forms for the frequency assignment can be
found on the website of the Federal Network Agency: www.bundesnetzagentur.de.
Specifications
Receiver
Microphone
Size: 21x4x16 cm (WxHxD)
Size: 240x45 mm
Weight: 1.2 kg
9 V battery/rechargeable battery
Power souce: AC 230 V ~ 50 Hz
Transmitting power: 10 mW
Frequency : 50 - 15000 Hz
Frequency: VHF (174 - 216MHz)
Range (max.): 100 m
Output power (ERP, Watt): 0,0013
Distortion factor: < 0.5%
Emission Designator: F3E
Signal-to-noise ratio (S/N): > 70 dB
Output jack: 6.3 mm
Temperature: (-20~50) °C bis 90%
Capability Characteristics
This wireless microphone set includes one microphones and one receiver. The receiver has one channel. The ro-
bust wireless microphone is ideal for karaoke- or other public adress events.
Getting started
• Connect the receiver to an electric outlet and insert batteries into the microphone.
• Put the antenna of the receiver upright.
• Switch on the receiver. The operation state will be signalied by the operation display LED.
• Now switch on the microphone.
• If the receiver receives the signals from the microphone correctly the LEDs RF will show.
5
