auna multimedia Connect 100, Manual

Page: 18 / 62

18
Display 1 6 Aux In
Operation keys:
HOME, MODE; PRESET, TUN+, TUN+
2 7
Line Out
NAV / OK
3 8
USB port
VOL+/- / Power 4 9 DC In
SNOOZE
5 10
Power switch
Remote Control:
• Remember to pull out the clear plastic tab from the battery compartment before using the remote.
• To remove the battery from the remote, use your thumb to pull out the battery tray. Replace it with a
CR2025 type 3V battery, taking care to insert it with the positive (+) side up.
Initial Use
• Use the supplied mains adaptor to connect the device to a household mains socket
• Switch the device on with the power switch on the rear. The press POWER on the front to wake the
device up from standby mode.
• When it is the first time running the device, the system will ask you to set Language and Network Con -
figurations. You may setup the network connection immediately, or set it later.
Use NAV (=rotate to scroll) to select the desired option. Press NAV/OK to confirm.
• Press POWER/STANDBY (4) for standby. Date and time, as well as alarms - if activated - will still be
shown on the display when in standby mode.