Aumuller M-COM Click, Assembly And Commissioning Instructions

Page: 4 / 4

AUMÜLLER AUMATIC GMBH
Gemeindewald 11
86672 Thierhaupten
Tel. +49 8271 8185-0
Fax +49 8271 8185-250
info@aumueller-gmbh.de
www.aumueller-gmbh.de
AUMÜLLER AUMATIC GMBH
Gemeindewald 11
86672 Thierhaupten
Tel. +49 8271 8185-0
Fax +49 8271 8185-250
info@aumueller-gmbh.de
9000021701_V0.1_KW20/16
T
ROUBLSHOOTING
T
ROUBLSHOOTING
:
Exchanging a faulty drive in the multi-drive
system:
T
ROUBLSHOOTING
:
M-COM
®
Click take off under voltage:
¢ Switch off the supply voltage.
¢
Disconnect the connection cable from the faulty drive.
¢
Demount the faulty drive.
¢
Mount the new / repaired drive and connect it.
¢
Switch on the supply voltage - in CLOSE direction.
¢ Reset the M-COM
®
Click (see chapter „Reset and re-
initialisation of M-COM
®
Click )“.
No adjustment is carried out in case of ex-
change of drives with special program-
ming
(e.g. strok e, speed)!
In case of repair please order an exchange drive with the
same parameter assignment as that of the faulty drive.
If the M-COM
®
Click is removed under voltage and the
drives move, then the drives stop immediately.
¢
Insert M-COM
®
Click again into the drive.
¢
Put the system back into operation.
!
4