6
Connect the juicing body to the machine body:
1. Put the central position of the inlet of the juicing
body to align the position of “unlocking sign” on
the machine body (the three fasteners of the
juicing body will be aligned).
2. Then rotate counterclockwise, and when you
hear a "tick" sound, it shows that the juicing body
is fully connected.
I. Product Usage
Follow these steps to install and use the product:
1. Juicing
1
Point the spiral propeller at the hole in the body
and push it flat to the bottom. (If can't, you can
easily point it by turning the propeller slightly)
2
Inject the large hole of the juice mesh from the tail
of the propeller, and the positioning bar of the
juice mesh is pushed into the slot of the juice
squeezer.
3
Displace the three fastening slots on the juicing
body cover from the three fastening slots on the
juicing body, push into horizontally, and then
rotated counterclockwise to screw tightly the
juicing body cover and the juicing body.
4
Place the juice cup next to the machine body and
its open aligns the juice mouth of the juicing body.
5
Summary of Contents for JC01 Pro
Page 2: ......
Page 11: ...9...
Page 15: ......
Page 16: ...Customer Service Department support aumate com...