3.
Once the desired end position OPEN has been reached, release the push button
.
➥
The LED continues flashing in blue for approx. 10 seconds. This time span al-
lows for end position setting.
4.
While LED is flashing in blue, hold down push button
for at least two seconds
until the LED is illuminated in green.
➥
The end position OPEN setting has been successfully completed.
7.2.
Position indicator setting
The following description applies for clockwise closing standard version.
Separate instructions are available for counterclockwise special version.
The position indicator shows the valve position by means of a yellow position
indication disc moving up and down. The white end position indication ring shows
the end position OPEN and the bottom final point of the position indication shows
the end position CLOSED.
Figure 18: Mechanical position indicator
[1]
End position indication ring with symbol for OPEN
[2]
Position indication disc
27
PF-M25X – PF-M100X
Parallel
Commissioning
