7.
Connect mains cable according to order-related wiring diagram.
Table 5:
Terminal cross sections
Cross section
Wire type
Designation
max. [mm²]
min. [mm²]
2.5
0.08
rigid/flexible
Mains cable
AWG 12
AWG 28
AWG
8.
Connect signal cables in push-in technology according to order-related wiring
diagram.
Damage to push-in terminals by jamming of wire end sleeves with the housing!
Replacement of the complete component is required.
→
Use suitable crimping pliers (Crimpfox 6 by Phoenix Contact or similar model)
to avoid unevenness of the wire end sleeve.
→
Always carefully remove signal cables.
Figure 14: Connect signal cables
Table 6:
Terminal cross sections
Cross section
Wire type
Designation
max. [mm²]
min. [mm²]
1.5
0.2
solid
I/O signal cable
1.5
0.2
flexible
1.5
0.2
flexible with wire end
sleeve without plastic
sleeve
AWG 16
AWG 24
AWG
18
PF-M25 – PF-M100
Electrical connection
Parallel
