Table 6:
Weights of multi-turn actuators SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1
with 3-phase AC motors
Weight
2)
Motor type
1)
Type designation
Actuator
approx. [kg]
155
ADX... 90-...
SAEx 25.1/
SAREx 25.1
165
ADX... 132-...
195
ADX... 112-...
SAEx 30.1/
SAREx 30.1
265
ADX... 160-...
415
ADX... 132-...
SAEx 35.1
430
ADX... 160-...
515
ADX... 160-...
SAEx 40.1
Refer to motor name plate
1)
Indicated weight includes AUMA NORM multi-turn actuator with 3-phase AC motor, electrical con-
nection in standard version, output drive type B1 and handwheel. For other output drive types, heed
additional weights.
2)
Table 7:
Weights for output drive type
[kg]
Flange size
Type designation
42
F25
A 25.2
69
F30
A 30.2
126
F35
A 35.2
202
F40
A 40.2
Table 8:
Weights for output drive type
[kg]
Flange size
Type designation
61
F25
AF 25.2
103
F30
AF 30.2
180
F35
AF 35.2
320
F40
AF 40.2
3.2.
Storage
Danger of corrosion due to inappropriate storage!
→
Store in a well-ventilated, dry room.
→
Protect against floor dampness by storage on a shelf or on a wooden pallet.
→
Cover to protect against dust and dirt.
→
Apply suitable corrosion protection agent to uncoated surfaces.
Risk of damage due to excessively low temperatures!
→
Actuator controls may only be stored permanently down to –30 °C.
→
On request, actuators controls may be transported in specific cases and for
short duration at temperatures down to –60 °C.
Long-term storage
For long-term storage (more than 6 months), observe the following points:
1.
Prior to storage:
Protect uncoated surfaces, in particular the output drive parts and mounting
surface, with long-term corrosion protection agent.
2.
At an interval of approx. 6 months:
Check for corrosion. If first signs of corrosion show, apply new corrosion protec-
tion.
16
SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1
Transport and storage
ACExC 01.2
