10
Step 1:
Assemble the device.
Insert the Leg Band through the holder of the Infant Oximeter Box. The
fluffy side of the Leg Band should face upward. And then plug in the sensor
cable.
Step 2:
Attach the sensor to the toe.
If you go with Infant Oximeter
Disposable
Sensor Cable, peel off the release
paper on the sensor first and wrap the adhesive patch around the toe.
If you go with Infant Oximeter
Reusable
Sensor Cable, peel off the arch-
shaped section of the release paper of the Adhesive Patch, followed by
placing the back of the sensor probe over the hole on the center of the
patch, and peel off the whole release paper and wrap the patch around the
toe.
