9
Device Setting Up
Before you begin your monitoring session, unpack the Thermometer Module and
become familiar with its parts.
Step 1:
Make sure the connector of the Thermometer
Box aligns with the connector on the holder.
Step 2:
Secure the Thermometer Box onto the holder of
the Sensor Patch.
Step 3:
Peel the releasing paper off the Sensor Patch.
Step 4:
Attach the sensor probe to the center of the
armpit, with the Thermometer Box placed on
the chest.
NOTE:
The Power LED will blink green when the power is ON.
Summary of Contents for GA-AP0011
Page 4: ...3 Guide to Symbols ...
Page 5: ...4 ...
