- 03 -
Getting Started
Charging
Fully charge your product before first use. To charge, simply connect one end of the micro-USB cable to a
USB charging port and the other end to the input port on the product. When the red LED indicator turns off,
the BT-C6 is fully charged and ready for use. Charging takes around 2.5 hours.
●
●
To power on, press and hold the multi-function button for 3 seconds. The LED indicator will then flash
green in transmitter mode or blue in receiver mode
To power off, press and hold the multi-function button for 3 seconds. The LED indicator will then turn off
1.
2.
Connect one end of the included 3.5mm audio cable to the 3.5mm audio jack or the Toslink optical
cable to the optical input on the BT-C6, and connect the other end of the cable to your audio source
device (TV, computer, DVD player, CD player, or MP3 player) that doesn’t have wireless function
Slide the OPT/AUX switch to “AUX” if you use the 3.5mm jack or “OPT” if you use the optical input. Then
slide the TX/RX switch to “TX” position
Powering On / Off
Pairing
Transmitter Mode (TX Mode)
