8.3.2 System Config
Press to select TV Setting,
Video Setting, Audio Setting, Language,
Parent Control, Time Setting, and System
Info Options, press ENTER to confirm.
/
8.3.2.1 TV Setting
The TV Setting has the following options:
TV System, Video, and TV Type. Press
to move the cursor to one of the
options, press to change the setting,
or press ENTER to change the setting.
Press RETURN or SETUP to exit.
/
/
Picture 14
8.3.2.2 Video Setting
The Video Setting has the following
options: Brightness, Contrast, Hue, and
Saturation. Press to move the cursor
to one of the options, press to
change the setting, or press ENTER to
change the setting. Press RETURN or
SETUP to exit.
/
/
Picture 15
8.3.2.3 Audio Setting
This function is not available yet.
8.3.2.4 Language
The Language menu allows the user to
change the OSD Language. Press
to change the language, or press ENTER
to change the setting. Press RETURN or
SETUP to exit.
/
Picture 16
8.3.2.5 Parent Control
The Parent Control menu has two options:
Change Pin and Channel Lock. When
selecting Change Pin, the user will be asked
to enter the Old Pin, New Pin and the New
Pin again. In order to change the Channel
Lock, the user will be asked to enter the
password (pin) first, if the password is
correct, the Channel Lock menu will appear.
Use to select a channel, press
ENTER to lock or unlock the channel.
Press RADIO button to switch to radio
channels, press RADIO again to switch
back to TV channels. Press RETURN or
SETUP to exit.
/
Picture 17
Picture 18
Picture 20
Picture 19
-19-
The system default password is 0000.
Picture 21
8.3.3 Installation
Press to select Auto Scan,
Manual Scan, and Default Setup Options,
press ENTER to confirm.
/
8.3.3.1 Auto Scan
In Auto Scan, press to select
your country, press to move to Start
Scan, Press ENTER to start.
/
/
Picture 22
Picture 23
8.3.3.2 Manual Scan
In Manual Scan menu, a scan can be
performed by setting the following options:
Country, Scan Type, Start Channel, End
Channel. If the Scan Type is Signal
Channel, only the Country and Start
Channel can be set. If the Scan Type is
Channel Range, the Country, Start Channel,
and End Channel can be set. Use
to select the options and to change
the settings. Once finished with the settings,
move to Start Scan and press ENTER to start.
/
/
Picture 24
8.3.3.3 Default Setup
A message box will appear, asking if you
want to reset the machine to factory
default settings. After the reset, the first
time installation message will appear.
Picture 25
8.3.4 Game
There are three games in the Game menu.
Press
to select the game you want
to play, press ENTER to confirm. The
games are played using
button. Press RETURN or SETUP to exit
the game.
/
/ / /
Picture 26
Picture 27
Picture 28
Picture 29
-20-
8.3.2.6 Time Setting
TIME ZONE: If you changed the country
whilst searching for channels, you cannot
adjust the time zone. Restore to factory
settings, and don't search for channels.
Access the TIME ZONE menu, then press
ENTER, a menu will show, use UP or
DOWN to select the time zone you are
and press ENTER to confirm.
8.3.2.7 System Info
System Info displays the firmware version
and date, along with tuner and model
information.
Summary of Contents for DA110BD
Page 1: ......
