￭
Full Scan
To perform a full scan.
￭
Manual Tune
Manual scan for stations on the selected frequency.
￭
Prune Invalid
The Prune Invalid function can be used to remove any
stations saved on the DR245 that are not available.
￭
DRC
Dynamic Range Compression (DRC) balances the
differences in volume between the loudest and quietest
audio being broadcasted. This can reduce the need to
adjust volume when the sound being broadcasted changes
volume.
Note:
DRC is managed by the broadcaster and may not be
utilized by all stations.
￭
System Settings
Please refer to full section 5.6 for more information.
5.4 FM Mode
FM radio mode allows you to listen to FM broadcasting
(87.5 – 108MHz) and view RDS (Radio Data System)
information.
5.4.1 Scan
- Press and hold / on the DR245 or Up / Down on the
remote to scan for a station, the radio will turn to the next
station found.
- Press / on the DR245 or Up / Down on the remote to
turn the radio up or down in 50KHz steps for fine tuning.
-8-
-7-
5.4.2 Pre-set and Recall
￭
Preset a station:
1. Press and hold button on the remote for 3 seconds.
2. Save to Preset will be shown on the screen.
3. Use Up / Down on the remote to select a preset number.
4. Press to save the current station to preset.
￭
Recall a preset station:
1. Press button on the remote.
2. Preset Recall will be shown on the screen.
3. Use Up / Down on the remote to select a preset station.
4. Press to change the current station to selected
station.
20 preset stations can be saved in total, once a station is
saved in preset, user can use the number pad on the
remote to enter the preset number and change to the
saved station.
5.4.3 FM Radio Settings
1
.
Press
MENU
on the DR245 or
MENU
on the remote to
see DAB radio settings.
2
.
Use / on the DR245 or Up / Down on the remote to
select one setting.
3
.
Press
OK
on the DR245 or on the remote to enter
the setting.
￭
Scan Setting
Toggle between scan of Strong Stations Only and All
Stations.
￭
Audio Setting
Choose between Stereo Allowed (default and
recommended) or Forced Mono audio output.
English
