manualshive.com logo in svg

Auger Torque SWEEPER BROOM, Quick Start Manual, Page: 3 / 4

Share
Download
Auger Torque SWEEPER BROOM Quick Start Manual Download Page 3

EUROPE:  +44 (0) 1451 861 562            AUSTRALIA: +61 (0) 7 3274 2077            USA: (+1) 844 287 6300

3

3

3

3

Auxiliary Power Supply

Water Pump Cable 

DUST SUPPRESSION SYSTEM

Control Box

•  Mount control box in a suitable position in the 

operators area so that the toggle switch is 

accessible.

•  Route cable from pump along parent machine to 

the control box in the operator’s area. Secure as 

necessary, ensure cable is free from moving parts.

•  Connect the cable plug to the control box plug.
•  Connect the control box to the parent machines 

auxiliary power supply.

•  The water pump is switched on an off with the 

toggle switch on the control box.

WARNING: 

Do not run the pump without adequate water.

Water Tank

Fill water tank with clean fresh water do not use dirty water, salt water or chemicals. Dirty water can block 

the system and spray nozzels. Salt water and chemicals will corrode the system. Chemical can also be 

harmful to peaple , animals, plants and soil.

Water Pump

Water Tank

Filler Cap

Suction Filter

Floating Breather Valve

Spray Nozzles

Summary of Contents for SWEEPER BROOM

Page 1: ...4 days of purchase by the end user FITTING THE SWEEPER UNIT Refer to the parent machine operators manual for attaching accessories Fit Sweeper to parent machine arms and lock in place Locate the flow and return hydraulic pipes on the Sweeper Unit Connect hydraulic pipes to parent machine Connect quick release couplers if fitted 2 Slot the top of the parent machine frame under the top edge of the M...

Page 2: ...ulic quick release couplers which are required for connection to the parent machine The parent machine auxiliary hydraulic connections are normally located near the end of the loader arms The motor and bearing assemblies on the Sweeper unit can be changed over from right to left so that the motor hoses are postioned near the auxiliary hydraulic connections on the parent machine see operators manua...

Page 3: ...parts Connect the cable plug to the control box plug Connect the control box to the parent machines auxiliary power supply The water pump is switched on an off with the toggle switch on the control box WARNING Do not run the pump without adequate water Water Tank Fill water tank with clean fresh water do not use dirty water salt water or chemicals Dirty water can block the system and spray nozzels...

Page 4: ...el use just enough brush speed to roll the gravel not throw it Heavy Debris A slow travel speed is required Sweep a path less than the full width of the sweeper Increased engine speed may be required if debris becomes very heavy During Use Always carry the sweeper low to the ground to ensure good operator visibility Avoid excessive downward pressure on the brush and jockey wheels to prevent excess...

Reviews:

No comments