Auerswald COMpact 5000R Advanced Information Download

Page: 713 / 1388

File Management

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 713 -

File Management

Proceed as follows:
• Using the Configuration Manager (page

Abonnés (Abo) >

Provisioning d’IP > Gestion des fichiers

)

types d’appareils

Select the device to be configured.
If there is no file available for a device type which means that the list for

the provisioning files is still empty, a new provisioning file must be created

via

Nouveau

If a template exists for a device type, it is copied to the new file.

Pré-réglage de l’éditeur
Éditeur de fichiers

Via the file editor, settings (e.g. NTP or contacts) are directly made in the

provisioning file (*.xml, *.cfg).

Provisioning file (*.xml, *.cfg) > Éditer

Variables for the parameters to be provisioned are created as

palceholders in the configuration files provided by the manufacturer.

During provisioning, these are replaced by the corresponding values from

the PBX configuration.
Changes in the settings are effective after saving.

COMfortel IP Editor

The COMfortel IP Editor simplifies the provisioning settings (e.g. NTP or

function keys) and is only available for the COMfortel xx00 IP devices.The

settings are adopted to the provisioning file after saving.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands