manualshive.com logo in svg

Auerswald COMpact 2206 USB, Installation And Configuration Manual

The Auerswald COMpact 2206 USB is a versatile and user-friendly telephone system. For detailed instructions on installation and configuration, be sure to download the free Installation and Configuration Manual from manualshive.com. This comprehensive manual will guide you through setup and ensure you get the most out of your product.

Share
Download
background image

Connect additional Accessories

33

Connect additional Accessories

The PBX allows the connection of a system display SD-420 (Auerswald
accessory). The system display can be connected to the PBX with the
built-in TAE-jack or with a remote TAE wall jack similar to other analog
telephones. The connection to the clamps have to be made with tele-
communications cable (e.g.  JYY 0,6 mm).

You are in need of one wire pair for a system display SD-420. If you use
a wire diameter of 0,6 mm, the wires may have a length of 800 m
between the PBX and the wall jacks.

The connector of the system display is plugged into an F-coded jack
(

Pic. 39

).

Connect the System Display SD-420

Pic. 39:
Wall jack for the system display

or direct connection to an
available TAE jack

Summary of Contents for COMpact 2206 USB





































































Reviews:

No comments

Related manuals for COMpact 2206 USB

Brands by name

Popular brands

Load more brands