Preparation (Modules)
23
COMmander 8a/b Module Overview
COMmander VMF Module Overview
Fig. 11: COMmander 8a/b module
햲
Terminal clamps (removable) for connecting analogue
end devices to the internal a/b ports 1-4
햳
Terminal clamps (removable) for connecting analog end
devices to the internal a/b ports 5-8 (the terminal clamp
labelled with DIS is not in use!)
햴
A connector for attachment on the base circuit board
햵
A connector for connecting to the front panel of 19"
casing variants
햴
햲
햳
햵
Fig. 12: COMmander VMF module
햲
2-port switch (Ethernet) for connecting to the RJ-45
socket on the base circuit board and to the network or the
respective RJ-45 socket on the neighbouring VoIP mod-
ule
햳
A connector for attachment on the base circuit board
햴
SD card slot
햳
햲
햲
햴
Summary of Contents for COMmander Basic.2
Page 2: ......
Page 83: ......
Page 84: ...884285 05 04 11 For the sake of the environment 100 recycled paper...
