COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
415
Settings – Hardware
Selection of modules
Selection of modules
Topics
–
Settings Modules
Proceed as follows:
•
Using the Configuration Manager (page
Hardware > Selection of
modules
)
Notes:
The specifications here have to match the actual hard ware configura-
tions of your PBX. If this is the case, the settings will be marked in black.
If it is not the case, the settings will be marked in red.
If an inserted module should not be used, select the option
not defined
in the corresponding list field.
Configuration
Select the modules that are inserted in the corresponding slot.
move
Moves a module to another slot. The settings already made for this module
will not be lost by this action.
