Auerswald COMfortel M-200, Setup And Quick Manual

Page: 47 / 72

Commissioning
COMfortel M-200/M-300 - Setup and Quick Guide V03 09/2014
47
the contacts in the compartment and slide the battery in the
direction of the contacts.
Caution: The handset may be damaged if the battery is
not inserted correctly.
씮
Make sure that the battery contacts are touching the contacts
in the battery compartment before you slide the battery into
the compartment.
4.
Place the battery compartment cover on the casing and slide
it upwards until it clicks into place.
Note: The telephone's type plate and CE marking are listed on a
label in the battery compartment.
Integrated battery (only COMfortel M-300)
The battery is integrated into the handset and cannot be remo-
ved. If the battery has to be replaced, contact your specialised
dealer.
Note: The typeplate and the CE symbol are located on the back
of the handset.
Connecting the charging cradle and charging
the battery
Requirements
– Wall-mounted power supply with type no. FW7600/06
– Charging cradle
– 230 V mains socket