Auerswald COMfortel 600, Operation Manual Setup And Operation, Page: 57 / 84

Operation and Configuration
COMfortel 600 - Setup and Operation V01 06/2014
57
Note: If the date (only day and month) and time are transmitted over your
connection as a part of the CLIP information associated with a call, this time
is automatically accepted by the telephone. For more information about the
settings required to operate the telephone on an Auerswald PBX, see
page 51 .
1.
Press the Menu key.
2.
Use the arrow keys to scroll to the SET TIME & DATE menu.
3.
Press the OK key.
The hour shown on the top left of the display is blinking.
4.
Enter the current hour. Possible entries:
쐽
Up to 2 digits
쐽
Digits 0 to 9
Now the minute display is blinking.
5.
Repeat step 4 for minutes, month, date and year.
Note: The currently set year is used to calculate the weekday.
The number of the weekday (for example, 5 for Friday) is blinking.
6.
If you would like to disable the display of the weekday, press one of the ar-
row keys.
This deletes the number of the weekday.
Note: If you would like to change the entries again, repeat steps 4 to 6.
Setting the Hour Format
You can show the time on the display in a 12- or 24-hour format.
1.
Press the Menu key.
2.
Use the arrow keys to scroll to the HOUR FORMAT menu.
3.
Press the OK key.
The currently set hour format is now displayed.
4.
Use the arrow keys to scroll to the hour format you want.
5.
Press the OK key.
Note: If you would like to change the hour format again, repeat steps 3 to 5.